Dell Inspiron 14 - Removing the Power-Adapter Port; Prerequisites; Procedure

Removing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the memory module(s).
4 Remove the wireless card.
5 Remove the hard drive.
6 Remove the keyboard.
7 Remove the palm rest.
Procedure
1 Disconnect the power-adapter-port cable from the system board.
2 Note the power-adapter-port cable routing and remove it from the
routing guides on the computer base.
58