Dell Inspiron 14 - Replacing the Display Assembly; Procedure; Post-Requisites

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the display assembly on the computer base and align the screw
holes on the display assembly with the screw holes on the computer
base.
2 Replace the screws that secure the display assembly to the computer
base.
3 Route the antenna cable through the routing guides on the computer
base.
Post-requisites
1 Replace the system board.
2 Replace the palm rest.
3 Replace the hard drive.
4 Replace the wireless card.
5 Replace the memory module(s).
6 Replace the base cover.
7 Replace the keyboard.
8 Replace the optical drive.
9 Replace the battery.
70