Dell Inspiron 14 - Removing the Display Assembly; Prerequisites; Procedure

Removing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the optical drive.
3 Remove the base cover.
4 Remove the memory module(s).
5 Remove the wireless card.
6 Remove the hard drive.
7 Remove the keyboard.
8 Remove the palm rest.
9 Remove the system board.
Procedure
1 Note the antenna cable routing and remove the cable from its routing
guides.
2 Remove the screws that secure the display assembly to the computer
base.
68