Dell Inspiron 1420 - Replacing the Display Bezel; Removing the Display Panel

Great user manuals database on UserManuals.info
Replacing the Display Bezel



1. Follow the instructions in Before You Begin.

2. Follow the instructions in Removing the Display Assembly.

3. Starting near the hinges (near the Dell logo), use your fingers to snap the new bezel into place.

4. Replace the six M2.5 x 5-mm screws to secure the bezel.

5. Replace the six rubber bumpers to cover the screws.

6. Replace the display assembly (see Replacing the Display Assembly).
Removing the Display Panel



1. Follow the instructions in Before You Begin.

2. Remove display assembly (see Removing the Display Assembly).

3. Remove the display bezel (see Removing the Display Bezel).

4. Remove the two screws securing the display panel to the display cover.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
1
screws (2)
2
display panel
3
display cover