Dell Inspiron 1420 - Removing the Palm Rest

Great user manuals database on UserManuals.info
Back to Contents Page
 Palm Rest
Dell™Inspiron™1420/DellVostro™1400
Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest



1. Follow the instructions in Before You Begin.

2. Remove the optical drive (see Removing the Optical Drive).

3. Remove the keyboard cover (see Removing the Keyboard Cover).

4. Remove the keyboard (see Removing the Keyboard).

5. Remove the display assembly (see Removing the Display Assembly).

6. Turn the computer over and remove all the screws (22) from the bottom of the computer including the three screws from the battery bay.

7. Turn the computer over and remove the three M2.5 x 5mm screws from locations marked P on top of the palmrest.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
1
bottom of the system
2
screw (22)