2. Carefully pry the bezel along the edges with your fingers.
NOTE:
Do not use a scribe or any other objects, and apply pressure to the display panel to avoid damaging the display
panel.
3. Work around the edge of the display assembly to pry the display bezel from the display assembly.
4. Lift and remove the display bezel from the display assembly.
Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the display bezel and provides a visual representation of the installation procedure.
56
Removing and installing components
To Next Page
Loading...
