Table 32. System setup options—Advanced menu (continued)
Advanced
Default: Enabled
SATA/NVMe Operation mode Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI /NVMe
Adapter Warnings Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Function Key Behavior Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Keyboard Illumination Selects the operating mode of the keyboard illumination
feature.
Default: Disabled
Keyboard Backlight with AC Selects the timeout value for the keyboard backlight when an
AC adapter is plugged into the computer.
Default: 1 minute
Keyboard Backlight with Battery Selects the timeout value for the keyboard backlight when
the computer is running on battery power.
Default: 1 minute
Battery Health Displays the battery health.
External USB Ports Allows you to enable or disable the external USB ports.
Default: Enabled
Enable Audio Allows you to enable or disable the audio.
Default: Enabled
Microphone Allows you to enable or disable the microphone.
Default: Enabled
Camera Enables or disables the camera.
Default: Enabled
Secure Digital (SD) card Enables or disables the SD card.
Default: Enabled
Battery Charge Configuration Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Advanced Battery Charge Configuration Enable Advanced Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
IPv4 HTTP Support Default: Disabled
IPv6 HTTP Support Default: Disabled
Maintenance
Data Wipe on next boot Enables or disables data wipe on the next boot.
BIOS setup 123
To Next Page
Loading...
