Removing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-
touchscreen display.
1 Remove the battery.
2 Follow the procedure from step 1 to step 3 in “Removing the optical
drive”.
3 Remove the keyboard.
4 Follow the procedure from step 1 to step 5 in “Removing the base cover”.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the memory module.
7 Remove the wireless card.
8 Remove the I/O board.
9 Remove the heat sink.
10 Remove the system board.
11 Remove the heat sink.
12 Remove the display bezel.
13 Remove the display panel.
Procedure
1 Remove the screws that secure the display hinges to the display back-
cover.
90
To Next Page
Loading...
