1 Power-adapter port
Connect a power adapter to provide power to your computer and charge the
battery.
2
USB 3.0 ports (2)
Connect peripherals such as storage devices and printers. Provides data transfer
speeds up to 5 Gbps.
3
Headset port
Connect a headphone or a headset (headphone and microphone combo).
Right
1 Media-card reader
Reads from and writes to media cards.
2
USB 3.0 port with PowerShare
Connect peripherals such as storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge
your USB devices even when your computer is turned o.
NOTE: If your computer is turned o or in hibernate state, you must
connect the power adapter to charge your devices using the
PowerShare port. You must enable this feature in the BIOS setup
program.
NOTE: Certain USB devices may not charge when the computer is
turned o or in sleep state. In such cases, turn on the computer to
charge the device.
3 HDMI port
Connect a TV or another HDMI-in enabled device. Provides video and audio
output.
4 Network port
9
To Next Page
Loading...
