Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the hinge covers on the palm-rest assembly under the display
hinges and then place the palm-rest assembly on the display assembly.
2 Align the screw holes on the palm-rest assembly with the screw holes on
the display hinges.
3 Press down the display hinges and replace the screws that secure the
display hinges to the palm-rest assembly.
70
To Next Page
Loading...
