Steps
1. Align the notches on the solid-state drive/Intel Optane memory module with the tabs in the M.2 slot two on the system board.
2. Slide the solid-state drive/Intel Optane memory module into the M.2 slot two on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane memory module to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The figure indicates the location of the wireless card and provides a visual representation of the removal procedure.
Removing and installing components
29
To Next Page
Loading...
