Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the I/O board.
3. Install the touchpad.
4. Install the power button with optional fingerprint reader.
5. Install the speakers.
6. Install the power-adapter port.
7. Install the display assembly.
8. Install the heat sink.
9. Install the fan.
10. Install the wireless card.
11. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive in M.2 slot two.
12. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive in M.2 slot one.
13. Install the memory modules.
14. Install the battery.
15. Install the base cover.
16. Follow the procedure in After working inside your computer.
Removing and installing components
57
To Next Page
Loading...
