Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Disconnect the speaker cable from the system board.
2 Note the position of the rubber grommets before lifting the speakers.
3 Lift the right speaker by releasing the rubber grommets from the slots on the
palm-rest assembly.
4 Lift the status-light board from the slot on the palm-rest assembly.
5 Note the cable routing and remove the speaker cable from the routing guides on
the palm-rest assembly.
42
To Next Page
Loading...
