Dell Inspiron 15 7000 - Replacing the Touchpad; Procedure; Post-Requisites

Replacing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the touch pad with the screw holes on the palm-rest
assembly.
2 Replace the four screws (M2x2) that secure the touchpad to the palm-rest
assembly.
3 Adhere the tapes that secure the touchpad to the keyboard shield.
4 Slide the touchpad cable into the connector on the system board and close the
latch to secure the cable.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
72