Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Place the keyboard membrane on the back of the keyboard.
2 Align the keyboard membrane with the folding line and fold the keyboard
membrane.
3 Align the screw holes on the keyboard with the screw holes on the palm-rest
assembly.
4 Replace the eight screws (M1.2x1.5) that secure the keyboard to the palm-rest
assembly.
77