4 Peel o the tape that secures the I/O-board cable to the system board.
5 Open the latch and disconnect the I/O-board cable from the system board.
6 Using the pull tab, disconnect the hard-drive cable from the system board.
7 Open the latch and disconnect the touchpad cable from the system board.
8 Disconnect the power-adapter port cable from the system board.
9 Remove the two screws (M2x3) that secure the USB Type-C port bracket to the
system board and palm-rest assembly.
10 Lift the USB Type-C port bracket o the system board.
11 Disconnect the speaker cable from the system board.
12 Open the latch and disconnect the status-light board cable from the system
board.
13 Open the latch and disconnect the keyboard cable from the system board.
61
To Next Page
Loading...
