Dell Inspiron 1501 - Removing the Display Bezel; Replacing the Display Bezel


Removing the Display Bezel

1. Follow the instructions in Before You Begin.

2. Remove the display assembly (see Removing the Display Assembly).

3. Remove the six rubber display bumpers.

4. Remove the six M2.5 x 4.2-mm screws around the display bezel.

5. StartingabovetheDELL™logoonthedisplaybezel,useyourfingerstogentlypulluponthebezelandpryitawayfromthedisplayassembly.Working
your way around the display, continue to carefully pry up the bezel until you clear all sides of the display assembly.

Replacing the Display Bezel

1. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display assembly.

2. Replace the six M2.5 x 4.2-mm screws around the display bezel.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you
begin working inside the computer.
1
rubber display bumpers (6)
2
M2.5 x 4.2-mm screws (6)
3
display bezel
NOTICE: Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.
1
display bezel
2
display panel