Dell Inspiron 1501 - Key Combinations

Back to Contents Page
 Speakers
Dell™Inspiron™1501ServiceManual
Removing the Speakers

Removing the Speakers

1. Follow the instructions in Before You Begin.

2. Remove the hinge cover (see Removing the Hinge Cover).

3. Remove the keyboard (see Removing the Keyboard).

4. Remove the display assembly (see Removing the Display Assembly).

5. Remove the palm rest (see Removing the Palm Rest).

6. Disconnect the speaker cable connector from the system board.

7. Remove the M2.5 x 5-mm screws from the speakers.

8. Remove the speaker cable from the routing clips and remove the speakers.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
NOTICE: Handle the speakers with care to help prevent damage to them.
1
speakers (2)
2
speaker cable connector
3
M2.5 x 5-mm screws (2)