Dell Inspiron 1525 - Removing the Processor Thermal-Cooling Assembly; Replacing the Processor Thermal-Cooling Assembly

Great user manuals database on UserManuals.info
Back to Contents Page
 Processor Thermal-Cooling Assembly
Dell™Inspiron™1525/1526ServiceManual

Removing the Processor Thermal-Cooling Assembly


1. Follow the instructions in Before You Begin.

2. Turn the computer over.

3. Remove the eight captive screws securing the back cover and remove the module cover.

4. In sequential order, loosen the five captive screws securing the processor thermal-cooling assembly to the system board, then carefully lift the
processor thermal-cooling assembly out of the computer.

Replacing the Processor Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1
module cover
2
captive screws (8)
1
captive screws (5)
2
processor thermal-cooling assembly