Dell Inspiron 1525 - Replacing Mini-Card

Great user manuals database on UserManuals.info

5. Release the Mini-card by removing the securing screw.

6. Lift the card out of its system board connector.

Replacing Mini-Card

1. Insert the card connector into the system board connector at a 45-degree angle.

2. Press the other end of the card down into the slot on the system board until the card clicks into place.

3. Replace the securing screw.

4. Connect the cables to the Mini-Card, ensuring that you route the cables correctly.

5. Secure unused antenna cables in the protective mylar sleeve.

6. Replace the cover and tighten the eight captive screws.
1
antenna cable connectors
2
securing screw
1
Mini-card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and
realign the card.
NOTICE: To avoid damage to the Mini-card, never place cables under the card.
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini Card.