Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
NOTE:
The palm-rest and keyboard assembly consists of the following components:
● Palm rest
● Keyboard
● Wireless antenna (2)
● Touchpad
Next steps
1. Install the power button with optional fingerprint reader.
2. Install the power-button board.
3. Install the system board
4. Install the speakers (tweeters).
5. Install the speakers (woofers).
6. Install the display assembly.
7. Install the left fan and the right fan.
8. Install the power-adapter port.
9. Install the battery.
10. Install the wireless card.
11. Install the base cover.
12. Follow the procedure in After working inside your computer.
54
Removing and installing components
To Next Page
Loading...
