What to check if my Dell Inspiron 16 5635 system does not start up normally?
- CcookstacyJul 29, 2025
If your Dell Laptop system does not start up normally, check the battery status LED.
What to check if my Dell Inspiron 16 5635 system does not start up normally?
If your Dell Laptop system does not start up normally, check the battery status LED.
What to do if my Dell Inspiron 16 5635 Laptop battery is swollen?
If you notice that your Dell Laptop battery is swollen, discontinue using the laptop immediately. Disconnect the AC adapter and allow the battery to drain to prevent further damage to the device or internal components. Swollen batteries should not be used and should be replaced and disposed of properly. It is recommended to contact Dell product support for options to replace a swollen battery under the terms of the applicable warranty or service contract, including options for replacement by a Dell authorized service technician.
Why does my Dell Laptop have a display failure?
A display failure in your Dell Laptop can occur due to a couple of reasons: * A failure on the LCD power rail of the system board, which means no power is supplied to the LCD. If this is the case, the battery status LED will flash an error code [2,8]. * The display cable may not be connected properly. If this is the reason, the battery status LED will flash an error code [2,7].
Display Size | 16 inch |
---|---|
Graphics | AMD Radeon Graphics |
Wireless | Wi-Fi 6, Bluetooth 5.2 |
Processor | AMD Ryzen 7 7730U |
Storage | 512GB SSD |
Operating System | Windows 11 Home |
Battery | 54Whr |
Weight | 1.87 kg |
Display Resolution | 1920 x 1200 |
Display Features | ComfortView Support |
Ports | 1 x HDMI 1.4, 1 x SD card reader, 1 x Audio jack |
Dimensions | 356.78 x 251.90 mm |
RAM | 16GB DDR4 |
Guide for the initial setup and Windows installation process.
Outlines display type, resolution, luminance, color gamut, and viewing angles.
Provides essential safety guidelines before working inside the computer.
Steps to take before opening the computer for maintenance.
Important precautions to follow before and during disassembly/reassembly.
Guidelines to prevent damage from electrostatic discharge.
Describes the components of an ESD field service kit.
Step-by-step guide to remove and install the base cover.
Procedures for removing and installing the wireless card.
Instructions for replacing M.2 2230 and M.2 2280 SSDs.
Safety guidelines for handling Lithium-ion batteries before removal.
Step-by-step guide to remove and install the battery.
Instructions for removing and installing the heat sink.
Steps for replacing the power button assembly.
Steps for removing and installing the entire display assembly.
Procedures for removing the system board, including prerequisites.
Step-by-step instructions for updating the BIOS from within Windows.
Guide to updating BIOS using a bootable USB drive from Windows.
Procedures for updating BIOS using the F12 boot menu.
Safety guidelines and procedures for dealing with swollen batteries.
Steps to perform hardware diagnostics using SupportAssist.
How to initiate and interpret the M-BIST for system board diagnostics.
Procedure to test the LCD power rail using L-BIST.
How to run the BIST to diagnose screen abnormalities.
Using Dell SupportAssist OS Recovery for system restoration.