3. Replace the screw that secures the AC adapter connector to the computer base.
4. Replace the daughter board (see Replacing the Daughter Board).
5. Replace the middle cover (see Replacing the Middle Cover).
6. Replace the display assembly (see Replacing the Display Assembly).
7. Follow the instructions from step 7 to step 22 in Replacing the System Board.
8. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
