Replacing the Power Button Board
1. Follow the instructions in Before You Begin.
2. Align the slots on the power button board with the alignment guides on the palm rest and carefully place the power button board.
3. Replace the two screws that secure the power button board to the palm rest.
4. Adhere the power button board cable on the palm rest.
5. Turn the palm rest over.
6. Replace the palm rest (see Replacing the Palm Rest).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the optical drive (see Replacing the Optical Drive).
9. Follow the instructions from step 5 to step 7 in Replacing the Hard Drive.
10. Replace the module cover (see Replacing the Module Cover).
11. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
