Replacing the Processor Fan
1. Follow the instructions in Before You Begin.
2. Place the processor fan in the computer base.
3. Replace the two screws that secure the processor fan to the computer base.
4. Connect the processor fan cable to the connector on the system board.
5. Slide the I/O board cable into the connector on the system board and press down on the connector latch to secure the cable.
6. Replace the palm rest (see Replacing the Palm Rest).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the optical drive (see Replacing the Optical Drive).
9. Follow the instructions from step 5 to step 7 in Replacing the Hard Drive.
10. Replace the module cover (see Replacing the Module Cover).
11. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
