Figure 1. System-board connectors
1.
Fan-cable connector 2. Coin-cell battery
3. Memory-module slots 4. Speaker-cable connector
5. Microphone-module cable connector 6. Media-card reader cable connector
7. Wireless-card slot 8. Power-button board cable connector
9. Display-cable connector 10. Backlight-cable connector
11. Camera-cable connector 12. Solid-state drive slot
13. Hard-disk drive connector 14. Touchscreen-cable connector (optional)
The following image indicates the location of system board and provides a visual representation of the removal procedure.
84
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
