Steps
1. Lift the mylar that covers the wireless-card slot.
2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the
wireless-card slot.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
4. Adhere the tape that secures the wireless card to the system board.
5. Align and place the wireless-card bracket on the wireless card.
6. Replace the screw (M2x2.5) to secure the wireless-card bracket to the wireless card.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
26
Removing and installing components
To Next Page
Loading...
