Dell Inspiron 5300 - Page 51

Steps
1. Align the power-button board with the slot on palm-rest and keyboard assembly.
2. Connect the fingerprint-reader cable to the power-button board, and close the latch.
3. Adhere the fingerprint-reader cable to the palm-rest and keyboard assembly.
4. Adhere the tape that secures the fingerprint-reader cable to the palm-rest and keyboard assembly.
5. Align the power button with the slot on palm-rest and keyboard assembly.
6. Connect the power-button cable to the power-button board, and close the latch.
7. Adhere the tape that secures the power-button cable to the palm-rest and keyboard assembly.
8. Replace the screw (M2x5) that secures the power button to the palm-rest and keyboard assembly.
9. Align the power-button shield with the slot on the palm-rest and keyboard assembly.
Removing and installing components
51