Removing the memory modules
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Prerequisites
Remove the base cover
.
Procedure
1 Locate the memory module.
NOTE: The number of memory modules may vary with the conguration that you ordered.
2 Use your ngertips to carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops
up.
3 Remove the memory module from the memory-module slot.
10
22 Removing the memory modules