3 Route the antenna cable, avoiding the edge of the palm rest and the chip,
and adhere it to the system board.
CAUTION: To avoid damaging your computer, route the antenna
cable away from the edge of the palm rest and the chip.
1 antenna cable 2 chip
3 palm rest
4 Connect the hard-drive cable, speaker cable, and power-adapter port to
the system board.
Post-requisites
1 Replace the heat sink.
2 Replace the display assembly.
3 Replace the base frame.
4 Replace the keyboard.
5 Replace the fan.
6 Replace the wireless card.
7 Replace the memory modules.
8 Follow the procedure from step 3 to step 5 in replacing the hard drive.
9 Replace the battery.
75
To Next Page
Loading...
