After Working Inside Your Computer | 9
After Working Inside Your Computer
CAUTION: Leaving stray or loose screws inside your computer may severely
damage your computer.
1 Replace all screws and make sure that no stray screws remain inside
your computer.
2 Connect any external devices, peripherals, and cables you removed before working
on your computer.
3 Replace any media cards, discs, and any other part(s) that you removed before
working on your computer.
4 Connect your computer and all attached devices to their electrical outlets.
5 Turn on your computer.
book.book Page 9 Wednesday, November 26, 2014 4:00 PM
To Next Page
Loading...
