Solving Problems 31
Sound and Speaker Problems
Integrated Speakers
External Speakers
HINT: The volume
control in some MP3
players overrides the
Windows volume setting.
If you have been listening
to MP3 songs, make sure
that you did not turn the
player volume down or off.
RESTORE THE RECOMMENDED SETTINGS— Restore the original resolution
and refresh rate settings. See the Te l l M e H o w help file for instructions. To access
help files, see page 28.
ADJUST THE WINDOWS DISPLAY SETTINGS—
1 Click the Start button, point to Settings, and then click Control Panel.
2 Double-click the Display icon and then click the Settings tab.
3 Try different settings for Colors and Screen area.
ADJUST THE WINDOWS VOLUME CONTROL— Double-click the yellow
speaker icon in the lower-right corner of your screen. Be sure that the volume is
turned up and that the sound is not muted.
CHECK THE VOLUME CONTROL BUTTONS— Press both volume control
buttons simultaneously or press <Fn><End> to disable (mute) or reenable the
integrated speakers.
REINSTALL THE SOUND (AUDIO) DRIVER— See page 44.
VERIFY THE SPEAKER CABLE CONNECTIONS— Ensure that the speakers
are connected as shown on the setup diagram supplied with the speakers.
TEST THE ELECTRICAL OUTLET— Ensure that the electrical outlet is working
by testing it with another device, such as a lamp.
ENSURE THAT THE SPEAKERS ARE TURNED ON— See the setup diagram
supplied with the speakers.
To Next Page
Loading...
