Dell Inspiron 8100 - If You Drop or Damage Your Computer

Solving Problems 43
10 Ground yourself by touching one of the metal connectors on the back
of the computer.
11 Replace the memory modules, the memory module cover, and the
screw (see page 57).
12 Replace the hard drive (see page 62).
13 Replace the media bay device (see page 19) and any PC Cards you
removed.
14 Replace the battery.
15 Turn on the computer and verify that it is working properly.
If the computer does not start, or if you cannot identify the damaged
components, contact Dell for technical assistance (see page 73).
If You Drop or Damage Your Computer
1 Save and close any open files, exit any open programs, and shut down
the computer (see page 18).
2 Disconnect the AC adapter from the computer, and disconnect the
AC adapter from the electrical outlet.
3 Turn off any attached external devices, and disconnect them from
their power sources and then from the computer.
4 Remove and reinstall the battery.
5 Turn on the computer.
If the computer does not turn on, or if you cannot identify the damaged
components, contact Dell for technical assistance (see page 73).