Dell Inspiron Mini 1012 - Replacing the Display Assembly


9. Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the computer.

10. Disconnect the antenna cables from the Mini-Card.

11. Disconnect the display cable from the connector on the system board.

12. Remove the display cable grounding screw.

13. Remove the screw that secures the display assembly to the computer base.

14. Lift the display assembly off the computer.

Replacing the Display Assembly
NOTE: Ensure that you take adequate care while opening the display.
1
Mini-Card cable routing
2
display cable connector
3
display cable grounding screw
1
screw