3. Adhere the camera module in position.
4. Connect the camera cable to the connector on the camera module.
5. Replace the display bezel (see Replacing the Display Bezel).
6. Replace the display assembly (see Replacing the Display Assembly).
7. Replace the hinge cover (see Replacing the Hinge Cover).
8. Replace the palm rest assembly(see Replacing the Palm Rest Assembly).
9. Replace the hard-drive assembly (see Replacing the Hard-Drive Assembly).
10. Replace the keyboard (see Replacing the Keyboard).
11. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
