Keyboard 17
Replacing the Keyboard
1
Follow the instructions in "Before You Begin" on page 9.
2
Slide the keyboard cable into the connector on the system board. Press
down on the connector latch to secure the keyboard cable to the connector
on the system board.
3
Slide the tabs on the keyboard into the slots on the palm rest.
4
Gently press around the edges of the keyboard to lock the four tabs
securing the keyboard.
5
Close the display and turn the computer over.
6
Replace the battery. See "Replacing the Battery" on page 14.
1 keyboard cable 2 keyboard
To Next Page
Loading...
