Hinge Cover 53
Replacing the Hinge Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the tabs on the hinge cover with the slots on the computer base and
snap the hinge cover into place.
3
Turn the computer over.
4
Replace the screw that secures the hinge cover to the computer base.
5
Replace the battery. See "Replacing the Battery" on page 14.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 hinge cover
To Next Page
Loading...
