Tasten Beschreibung
Fn + F10 Tastaturbeleuchtung umschalten
Fn + F11 Druck
Fn + F12 Einfügen
Fn + Home Wireless ein/aus umschalten
Fn + Ende Energiesparmodus
Fn + Strg Anwendung önen
Fn + Esc Fn-Tastensperre umschalten
Fn + Pfeil nach oben Helligkeit erhöhen
Fn + Pfeil nach unten Helligkeit reduzieren
UEFI BIOS
UEFI is an acronym for Unied Extensible Firmware Interface. The UEFI specication denes a new model for the interface between
personal computer operating systems and platform rmware. The interface consists of data tables that contain platform related
information, plus boot and runtime service calls that are available to the operating system and its loader. Together, these provide a standard
environment for booting an operating system and running pre-boot applications. One of the main dierences between BIOS and UEFI is the
way applications are coded. Assembler was used if functions or applications had to be coded for the BIOS while a higher level language
code will be used to program the UEFI.
Dell UEFI BIOS implementation will supersede the existing two dierent sets of BIOS in the portables and desktop products into one single
UEFI BIOS moving forward.
Important Information
There is no dierence in between the conventional BIOS and the UEFI BIOS unless the UEFI option is checked in the 'Boot List Option'
setting in the BIOS page. This will allow the user to create a UEFI boot option list manually without aecting the existing boot priority list.
With the implementation of UEFI BIOS, the changes are more related to the manufacturing tools and functionalities with very minimal
impact to the customer's usages.
Few things to remember are:
• If customers have a UEFI boot media and ONLY if they have UEFI boot media (either in the optical media or via USB storage), the one-
time boot menu will show an additional section listing the UEFI boot options. If they don't have UEFI boot media attached, they will
never see this option. Almost all will never get to see this option unless the UEFI boot option is specied manually through the 'Boot
Sequence' settings.
• How to change Service Tag/Owner Tag?
When the service technician replaces a system board, he's required to set the service tag upon the system starts up at one time o
basis. Failure to set a service tag may result system battery not being able to charge. Therefore, it is very important that the service
technician set the correct system service tag. If a wrong service tag is set, there's no way to reset it and the technician will have to
place order for another system board replacement.
• How to change Asset tag information?
To change the Asset tag information, we can use one of the following software utilities.
24
Technologie und Komponenten
To Next Page
Loading...
