What to do if Dell Latitude 3340 2-in-1 Laptop battery is stuck?
If the battery is stuck in your Dell Laptop due to swelling, do not try to free it. Puncturing, bending, or crushing a battery can be dangerous.
What to do for LCD failure on Dell Latitude 3340 2-in-1 Laptop?
If you are experiencing LCD failure on your Dell Laptop (SBIOS message), replace the LCD module.
What happens if I use a non-Dell battery for my Dell Latitude 3340 2-in-1?
If you are using a non-Dell or incompatible battery in your Dell Laptop, replace the battery only with a compatible battery purchased from Dell that is designed to work with your Dell computer.
Why does the battery status LED flash error code [2,7] on my Dell Latitude 3340 2-in-1?
If the battery status LED on your Dell Laptop flashes error code [2,7], the display cable may not be connected properly. Check to ensure the display cable is properly connected.
How to troubleshoot invalid memory installed on Dell Latitude 3340 2-in-1?
If your Dell Laptop reports invalid memory installed, reset and swap the memory modules among the slots. If the issue remains, replace the memory module.
What to do if Dell Laptop has memory failure?
If your Dell Laptop experiences a memory/RAM failure, try resetting and swapping the memory modules among the slots. If the problem persists, replace the memory module.
How to fix system board failure on Dell Latitude 3340 2-in-1?
To address a system board failure, including BIOS corruption or ROM errors, on your Dell Laptop, first flash the latest BIOS version. If the issue continues, replace the system board.
How to fix no memory detected on Dell Latitude 3340 2-in-1?
If your Dell Laptop is not detecting memory/RAM, ensure that the memory module is correctly installed. If the issue persists, try replacing the memory module.
General| Display | 13.3-inch HD (1366 x 768) touchscreen |
|---|---|
| RAM | 4GB DDR3L |
| Storage | 128GB SSD |
| Battery | 3-cell |
| Ports | 2 x USB 3.0, 1 x USB 2.0, HDMI, RJ-45, SD card reader |
| Wireless | Wi-Fi 802.11ac, Bluetooth 4.0 |
Essential safety guidelines for working inside the computer.
Steps to prepare the system before opening it.
General safety measures and precautions before component service.
Measures to prevent damage from static electricity.
Step-by-step guide to remove and install the system's base cover.
Covers precautions, removal, and installation of the Lithium-ion battery.
Procedures for replacing M.2 2230 and M.2 2280 solid-state drives.
Instructions for removing and installing the wireless network card.
Comprehensive steps for removing and installing the main system board.
Instructions for updating BIOS and recovering from issues.
Safety guidelines and procedures for dealing with swollen laptop batteries.
To Next Page