6. Remove the memory module.
7. Remove the M.2 SSD.
8. Remove the hard-disk drive for systems shipped with hard-disk drive.
9. Remove the WLAN card.
10. Remove the heatsink assembly.
About this task
Figure 1. System board connectors
1.
System fan cable connector 2. Display cable connector
3. Power adapter port connector 4. Memory module connector
5. Keyboard backlit LED cable connector 6. Keyboard cable connector
7. Touchpad cable connector 8. Battery cable connector
9. WLAN card connector 10. Hard-disk drive cable connector
11. USB cable connector 12. Speaker cable connector
13. I/O cable connector 14. M.2 SSD connector
70 Removing and installing components
To Next Page
Loading...
