EasyManua.ls Logo

Dell Latitude 5421 - Recovering the Operating System; Real-Time Clock (RTC Reset); Backup Media and Recovery Options

Dell Latitude 5421
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Blinking Pattern Problem description Suggested resolution
3 2 PCI or Video card/chip failure Replace the system board.
3 3 BIOS recovery image not
found
Flash latest BIOS version. If
problem persists, replace the
system board.
3 4 BIOS recovery image found
but invalid
Flash latest BIOS version. If
problem persists, replace the
system board.
3 5 Power rail failure Replace the system board.
3 6 Flash corruption detected by
SBIOS.
Replace the system board.
3 7 Timeout waiting on ME to
reply to HECI message.
Replace the system board.
Camera status light: Indicates whether the camera is in use.
Solid white Camera is in use.
Off Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
Solid white Caps Lock enabled.
Off Caps Lock disabled.
Recovering the operating system
When your computer is unable to boot to the operating system even after repeated attempts, it automatically starts Dell
SupportAssist OS Recovery.
Dell SupportAssist OS Recovery is a standalone tool that is preinstalled in all Dell computers installed with Windows 10 operating
system. It consists of tools to diagnose and troubleshoot issues that may occur before your computer boots to the operating
system. It enables you to diagnose hardware issues, repair your computer, back up your files, or restore your computer to its
factory state.
You can also download it from the Dell Support website to troubleshoot and fix your computer when it fails to boot into their
primary operating system due to software or hardware failures.
For more information about the Dell SupportAssist OS Recovery, see Dell SupportAssist OS Recovery User's Guide at
www.dell.com/support.
Real-Time Clock (RTC Reset)
The Real Time Clock (RTC) reset function allows you or the service technician to recover Dell Latitude systems from No
POST/No Power/No Boot situations. The legacy jumper enabled RTC reset has been retired on these models.
Start the RTC reset with the system powered off and connected to AC power. Press and hold the power button for thirty (30)
seconds. The system RTC Reset occurs after you release the power button.
Backup media and recovery options
It is recommended to create a recovery drive to troubleshoot and fix problems that may occur with Windows. Dell proposes
multiple options for recovering Windows operating system on your Dell PC. For more information. see Dell Windows Backup
Media and Recovery Options.
Troubleshooting
125

Table of Contents

Other manuals for Dell Latitude 5421

Related product manuals