Steps
1. Place the hinge caps and slide outward on the display hinges.
2. Replace the two (M2x2.5) screws to secure the hinge caps to the display hinge.
Next steps
1. Install the display bezel.
2. Install the display assembly.
3. Install the WWAN card.
4. Install the WLAN card.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
86
Disassembly and reassembly
To Next Page
Loading...
