Dell Latitude 5520 - 16 Heat Sink; Removing the Heat Sink; Installing the Heat Sink

16
Heat Sink
Removing the Heat Sink
1. Follow the procedures in Before Working On Your Computer.
2. Remove the battery.
3. Remove the back panel.
4. Remove the CPU door.
5. Loosen the screws on the heat sink.
6. Lift the heat sink and remove it from the computer.
Related Links
Installing the Heat Sink
Installing the Heat Sink
1. Tighten the screws as per the numerical sequence on the heat sink module.
2. Replace the CPU door.
3. Replace the back panel.
4. Replace the battery.
5. Follow the procedures in After Working Inside Your Computer.
41