Wireless Communications: Wi-Fi (WLAN) + Bluetooth
Intel® Tri Band Wireless-AC 17265 (Maple Peak) WiGig + 802.11AC Wi-Fi + BT 4.0 LE M.2 Card (Post RTS)
Host interface M.2 Type 3030-S3-A; 30mm x 30mm x 2.6mm; Single Sided; Key A with 1-DP pinout
(WiFi –PCIe 1.0; BT –USB2.0; WiGig IO –PCIe2.0; WiGig Audio/Video –DP v1.2)
Network standard IEEE 802.11a/b/g/n/ac
WiGig MAC and Baseband PHY functionality, and processes A/V (WDE) and USB (WSE) protocols
Wi-Fi Alliance Certifications 802.11ac, 802.11n, 802.11w, WPA, WPS, WMM, WFD, Wi-Fi Direct
Operating Frequency Bands 2.4 GHz, 5 GHz and 60GHz
Dual Stream N Support for two transmit and receive antennas enable better wireless at the same distance when compared to
older 802.11a/b/g solutions.
Data Rate Up to 867 Mbps
Power Consumption Optimized power modes (sleep states) reduce power consumption during periods of inactivity
Authentication
Authentication Protocols
Encryption
Product Safety
WPA and WPA2, 802.1X,(EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
64-bit and 128-bit WEP, AES-CCMP, TKIP
UL, C-UL, CB(IEC60950-1)
Management Capabilities Alerting Support for Intel® AMT 10.0 on Broadwell Y and Broadwell U.
Government Compliance FIPS (Windows® 7 only), FISMA
Client Utility Intel® PRO/Set Wireless Software v17.X and later.
Intel® WiGig Software v1.0 and later.
Software Support Microsoft® WHQL certified for Windows® 7 and Windows® 8.1; Linux
Radio On/Off Supported in both hardware and software
LED output Single WLAN-LED
Roaming Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, and
802.11a/b/g/n/ac)
Wake On Wireless Supported when VPro/AMT is activated, or Windows® 8 without Intel AMT
Wireless Display Intel WiDi Wireless Display, supports external display resolutions up to 1080p
Country Restrictions 802.11AC WLAN cards cannot be sold into Ukraine, Russia and Egypt
53
To Next Page
Loading...
