Network Adapter (NIC) – Intel
Intel® i218LM Gigabit Ethernet Controller Integrated on system board
External connector type RJ-45
Data Rates 10/100/1000 Mbps
Controller bus architecture PCI-e V1.1x1
Power consumption
(full operation per data rate connection speed)
1000 Mbps: 535 mW
100 Mbps: 260 mW
10 Mbps: 304 mW
Power consumption (standby operation)
WOL Disabled: 10mW (Disabled using driver)
No Link (w/ WOL): 17mW (cable Disconnent)
10 Mbps Idle (w/ WOL): 68 mW
100 Mbps Idle (w/ WOL): 176 mW
IEEE standards compliance 802.3, 802.3ab, 802.3u, 802.az
Boot ROM Support Support boot from PXE option ROM
Network Transfer Rate
Full duplex at 10, 100, or 1000 Mbps and
Half duplex at 10 or 100 Mbps.
Operating Temp/Storage Temp 0C to 85C/-40C to 125C
Operating Humidity 20% to 80% (non-condensing)
Operating System Driver support Win Server 2008/2012, Linux, Win7, Win8
Manageability WOL, PXE
Management Capabilities Alerting AMT 10 / DASH 1.1
Wired Communications
56
To Next Page
Loading...
