Dell Latitude 7490 - Security Option Dell Controlvault 2.0

Category Description NB-2024–S2
Dell ControlVault support Device connects to Dell ControlVault for
usage and processing
No
Dell ControlVault 2.0 support Device connects to Dell ControlVault 2.0 for
usage and processing . Enabled through Dell
ControlVault driver .
Yes
Programmed False Accept Rate Describes the programmed rate at which the
ngerprint match algorithm is set to ensure
false ngers are not accepted
0.10%
Programmed False RejectionRate Describes the programmed rate at which the
ngerprint match algorithm is set to
inappropriately reject a proper nger
1.00%
Template storage Describes the location of where templates
are stored for future reference
Dell ControlVault encrypted
Markers to generate template Number of markers utilized to generate a
successful match of presented ngerprint
>12
Match on chip Match of ngerprint occurs o host of main
CPU to remove possibility of spoong
No
FIPS 201 (PIV/HSPD-12) Certied Device certied with FIPS 201/PIV/
HSPD-12 requirements
No
ANSI/INCITS 378 standard support Template creation process provides support
for ANSI/INCITS 378 standard
Yes
Security Option Dell ControlVault 2.0
Table 41. Dell ControlVault 2.0
Title Description Dell ControlVault 2.0
CPU Technology N/A 250 Mhz ARM M3
RAM N/A 385dpi
ROM N/A 11.9 mm x 11.9mm
TPM included TPM enumeration included within
ControlVault
No
Host Interface N/A USB 2.0
Fingerprint Processing on Chip Fingerprint processing occurs within secure
boundary of ControlVault
Yes
Windows WBF Support Support for Windows Biometric Framework
when Fingerprint Reader is attached
Yes
FIPS 140-2 Level 3 Compliant Device compliant with FIPS 140-3 Level 2
requirements
Yes
FIPS 140-2 Level 3 Certied Device certied with FIPS 140-3 Level 2
requirements
Yes
Windows Certied WHCK certied drivers for Windows 7, 8, 8.1,
10
Yes
38 Engineering specications