Using the Control Panel
1
4
6
2 3
5
8
9
7
1 TEMP LED If the TEMP amber indicator is on or blinking,
one of the following problems could be
occurring:
• Internal temperature of the projector is too
high
For more information, see "Troubleshooting
Your Projector" on page 71 and "Guiding
Signals" on page 74.
2 Error LED Error LED is blinking amber, one of the RGB
LED has failed. The projector will
automatically shut down.
3 Up / Keystone Press to navigate through the On-Screen
adjustment Display (OSD) Menu items.
Press to adjust image distortion caused by
tilting the projector (+/-40 degrees).
4 Right Press to navigate through the On-Screen
Display (OSD) Menu items.
5 Power Turns the projector on or off. For more
information, see "Turning Your Projector On"
on page 14 and "Turning Your Projector Off"
on page 14.
Using Your Projector 19
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
