Dell Mobile M115HD - Installing the Remote Control Battery (Optional)

M
1
Installing the Remote Control Battery (Optional)
Remove the battery holder by holding
down the side release firmly and pulling
out the battery holder.
2 Insert a CR2032 coin cell battery and
align the polarity correctly according to
the marking in the battery holder.
NOTE: When you use the remote control
for the first time, there is a plastic sheet
between the battery and its contact.
Remove the sheet before use.
3 Replace the battery holder.
3
V
O
L
T
S
CR2032
3
V
O
L
T
S
CR2032
3
V
O
L
T
S
CR2025
Using Your Projector 24