Dell N2048 - User Manual

Dell N20xx/N30xx
Series Switch
Getting Started Guide
Guide de mise en route
Guia de Primeiros Passos
Guía de introducción
Regulatory Models: N2024, N2024P,
N2048, N2048P, N3024, N3024P, N3048,
N3048P, N3024F

Dell N2048 Specifications

General

Model	N2048
Category	Switch
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
RAM	512 MB
PoE	No
Ports	48 x 10/100/1000BASE-T
Uplink Ports	2 x 10GbE SFP+
Additional Uplink Ports	2 x 10G SFP+
MAC Address Table Size	16, 000 entries
Dimensions	440 x 44 x 350 mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)

Summary

N20 xx Series Installation

Rack Mounting a N20 xx Switch

Guides on safely mounting N20xx switches in a rack using the provided mounting system.

Stacking Multiple N20 xx Switches

Explains how to connect multiple N20xx switches together using mini-SAS ports for stacking.

Starting and Configuring the N20 xx Switch

Connecting a N20 xx Switch to a Terminal

Steps for connecting a terminal or computer to the switch console port for initial configuration.

Connecting a N20 xx Switch to a Power Source

Instructions for connecting the switch to AC or DC power sources.

Booting the N20 xx Switch

Performing the N20 xx Initial Configuration

Outlines the initial configuration procedure, including assumptions and required information.

N30 xx Series Installation

Rack Mounting a N30 xx Switch

Installing the Dell ReadyRail System

Stacking Multiple N30 xx Switches

Creating a Switch Stack

Starting and Configuring the N30 xx Switch

Connecting a N30 xx Switch to a Terminal

Steps for connecting a terminal or computer to the switch console port for initial configuration.

Connecting a N30 xx Switch to a Power Source

Instructions for connecting the switch to AC or DC power sources.

Booting the N30 xx Switch

Performing the N30 xx Initial Configuration

Outlines the initial configuration procedure, including assumptions and required information.

Enabling Remote Management

Initial Configuration Procedure

Details the steps for initial configuration using the Dell Easy Setup Wizard or CLI.