Need help?Do you have a question about the Dell Networking N3024 and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Enclosure Type | Rack-mountable |
| MAC Address Table Size | 16, 000 entries |
| Power Supply | Internal power supply |
| Rack Units | 1U |
| Operating Temperature | 0 °C to 45 °C |
| Ports | 24 x 10/100/1000 |
| Routing Protocol | OSPF, RIP |
| Remote Management Protocol | SNMP 1 |
| Features | VLAN support, QoS, IGMP snooping, port mirroring, DHCP snooping, ACLs |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab |
| Jumbo Frame Support | Yes |
| Storage Temperature | -40 °C to 65 °C |
| Operating Humidity | 10 to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Details expansion modules for Dell PowerEdge M1000e blade chassis, including module identification.
Lists available expansion modules and their specifications for the Dell Networking M8024-k switch.
Presents expansion modules and their compatibility for the Dell Networking M8024 blade switch.
Describes the expansion modules supported by the Dell Networking M6220 blade switch.
Details expansion modules compatible with the Dell Networking MXL blade switch.
Notes that the Dell Networking M6348 switch does not support any expansion modules.
Lists and describes expansion modules for Dell Networking N3000 series switches.
Details expansion modules available for Dell Networking N4000 series switches.
Presents expansion modules for Dell Networking 8100 series switches, including stacking usage.
Covers expansion modules supported by Dell Networking 7000 series switches.
Describes expansion modules for Dell Networking 62xx series switches and their bay configurations.
To Next Page